STC-1000 AC 220V Digital Temperature Controller Centigrade Thermostat Heating Cooling Controller with 3ft Long NTC Sensor Probe

Technical Parameters
Temperature measuring range:-50~99°C;
Resolution:0.1°C;
Accuracy:+/- 1°C (-50~70°C);
Sensor error delay:1 minute
Power supply:220VAC+/- 10%,50/60Hz;
Power consumption:less than equal 3W;
Sensor:NTC sensor (1PC);
Relay contact capacity:Cool 10A/250VAC;Heat 10A/250VAC;
mbient temperature:0~60°C;
Storage temperature:-30~75°C;
Relative humidity:20%~85% (No condensate).
Material: ABS

Package included:
1 x Mini Digital Temperature Controller Thermostat
1 x Temperature sensor probe with 2M cable
Heating and cooling function switchable, support °C display, automatic over temperature alarm.
Temperature Calibration，Refrigerating control output delay protection function are supported.
Control temperature by setting the temperature set value and the different value.
Temperature Measuring Range: -50~99°C; Resolution: 0.1°C; Accuracy: ±1℃ (-50~70°C); with 3ft sensor probe.
Can be Used for Domestic Freezer, Water Tanks, Refrigerator, Aquarium, Home brewing Beer, Chicken Incubator, etc, also suitable for Laboratories use and other temperature-controlled systems.

Key operational instructions:

1 .The way to check parameter:

Under normal working status, press “up” key it displays temperature setting value; press “down” key it displays the difference value.

2. The way to set parameter:

Under controller normal working status, press “s”key for 3s or more to enter parameter modifying mode, and the “Set” indicator light on, screen displays the first menu code “F1”.

Press “up”key or “down” key to adjust up and down and display the menu iem and the code of the menu item.Press “s” key to display the parameter value of the current menu. Press both “s”key and hold “up”key or “down” key simultaneously to choose and adjust the parameter value of the current menu value promptly. After finishing the setting, press and release the “(I)” key instantly to save the parameter modified value and return to display the normal temperature value. If no key operation within 10 seconds, system won’t save modified parameter, screen back to display normal temperature.

3. Restore system data:

When electrified, system will check itself, screen will display “Er” if error exit, please press any key at this time, and it restores default value and enter into normal working mode, it is advised to reset the parameter value under such conditions.

Description

Product details of

Switch the modes between cool and heat; Control temperature by setting the temperature setting

Control temperature by setting the temperature set value and the difference value
Temperature calibration;
Refrigerating control output delay protection;
Alarm when temperature exceeds temperature limit or when sensor error.
Power: 220v
Output: 220v 10A
Size: 8.5 x 7.5 x 3.5 CM

STC-1000 220V AC Digital Temperature Controller Thermostat Module is an Thermostatically incubator Relay Heating and Cooling device, capable of handling up to 10A of current which has inbuilt Switching modes that can switch between cooling and heating elements respectively. The temperature setting can be done on the control panel board for different values and calibrating the temperatures, The refrigerating control output has delay protection and alarm function when temperature exceeds temperature set limit or when sensor has an error error. All parameter setting can be saved in the internal memory even when there is power down.

Applications:

Can be used for domestic freezers, water tanks, refrigerators, industrial chillers, steamers, industrial equipment and other temperature control applications.

Super material: STC-1000 intelligent thermostat is an
independent product, ABS flame retardant shell, a variety of fields

perfect use, convenient operation and practical Settings, is your side

temperature control housekeeper.
Package including: 1 Pack of
STC-1000 intelligent thermostat module, which is equipped with 1pcs NTC

10K temperature probe. The NTC probe is waterproof and allows to control

the temperature even of fluids, allowing the controlled heated or

cooling.
STC-1000 Digital Thermostat specification: Temperature
control range: -50-99°C. Control accuracy of 0.1 degrees Celsius.

Control temperature by setting the temperature setting value and the

difference value;Temperature calibration. Easy operation, to set start

temperature, stop temperature, corrected temperature correction, delay

start.
High Power High Efficiency: Two Work Mode: Heating (
start temperature is less than stop temperature), Cooling ( start

temperature is above than stop temperature) It is precise and reliable

with good long-term stability. Refrigerating control output delay

protection.Alarm when temperature exceeds temperature limit or when

sensor error.
A
wide range of applications: temperature controller is equipped with

over 36’’ inch waterproof probe can be used in moisture and water

environment,you can use it in home brewing, fridge,pet breeding,reptile

tank. Widely used in hvac, dehumidifier, test and test equipment,

automobile, automatic control, weather station, humidity regulator and

other related temperature detection and control.

Reviews

There are no reviews yet.

Be the first to review “STC-1000 AC 220V Digital Temperature Controller Centigrade Thermostat Heating Cooling Controller with 3ft Long NTC Sensor Probe”

STC-1000 AC 220V Digital Temperature Controller Centigrade Thermostat Heating Cooling Controller with 3ft Long NTC Sensor Probe

Description

Product details of

Reviews

Related products

STC-3028 Dual Digital Thermostat Temperature Humidity Control STC 3028 Thermometer Hygrometer Controller AC 110V to 220V Egg Incubator Controller

Digital Temperature and Humidity Thermometer Hygrometer Mini LCD Display Thermostat for Aquarium Chillers Ac Room bifolios incubator Camara Box

XH-W3001 AC 220V 1500W Temperature Controller Thermostat Control Switch With Digital LED